- Condition: New
- Place of Origin: Guangdong, China (Mainland)
- Brand Name: HYD CNC
- Model Number: XPTHC-100III
- Voltage: 24V AC
- Rated Power: 100w
- Dimension(L*W*H): 320mm*260mm*90mm
- Weight: 8kg
- Certification: CE ISO
- Warranty: 1 Year
- After-sales Service Provided: Overseas third-party support available
- Controller For: Arc Voltage Plasma
- Working Mode: Stand Alone
- Input Voltage: AC 24V
- Up/down Motor: 24V DC Motor
- Motor Drive: PWM
- Output Current: 1A-4A
- Control Accuracy: ±1V to ±3V
- Lifting Speed: 1000mm/min. to 4000mm/min.
- Plasma Compatible: Thermal Dynamics, HPR130, 260, Ultra-cut series, etc
Packaging & Delivery
|Packaging Details:||Carton Box with Foam Protection|
|Delivery Detail:||Shipped in 6 days after payment|
24v Arc Voltage Plasma Torch Height Controller for Plasma CNC Cutting Machine
This arc voltage plasma torch height controller supports almost all plasma cutters on the market like Hypertherm, Thermal Dynamics, includes HD plasmas like HPR130, 260, Ultra-cut series, etc.
Also, it supports all CNC cutting controllers on market, like Hypertherm, Burny, industrial level controllers or Mach3, because it can start Auto Height control with or without Auto enable signal from CNC(but with Auto enable/disable signal from CNC, THC would work better).
No software needed.
-Input Power: AC24V±5%,50Hz/60Hz
-Down/Up Motor: DC24V DC MOTOR
-Motor Drive: PWM
-Output Current: 1A-4A, Load capacity: 100W.
-Working temperature:-10 to 600C
-Voltage Divide ratio: 100:1
-Control accuracy: ±1V to ±3V
-The speed of lifting: 1000mm/min to 4000mm/min.
A. Auto Initial Height Sensing(IHS).
Torch Retaining Cap IHS and Proximity Switch IHS (NPN and PNP),
Proximity Switch IHS is backup for Torch Retaining Cap IHS for cutting dirty/rusty workpiece, anti-collision torch clamp needed(optional).
B. Torch Anti-Collision Function(requires to work with anti-collision torch clamp)
No matter it is on Auto Control Model or Manual Control Model, when torch head touches the workpiece, THC would automatically lift torch up to IHS height.
C. Freeze Auto Height Control on Corner Signal.
The controller can recognize Corner Signal from CNC and freeze Auto Control Model on receiving this signal, and we have a unique design to backup this function.
D. Lifting torch Up on IHS Disabled status.
On IHS Disabled status, jogging torch head down until it reaches workpiece, when Arc Starts, torch head would lift up automatically to the Set Height set via the button SET-IHS.
E. Lifting Torch Up on TURN ON or Arc Off.
When CNC is TURN ON or Plasma Arc Off, THC would lift torch up for 2 seconds, please notice this Function during commissioning, avoiding the possible damage of limit switch or lift device.
F. Set Pierce Delay Time.
Set Button Set-PIERE (set Pierce delay time), to delay output this signal, it is a switch signal, set to detect arc voltage lead in THC. Once THC detect arc lead in, it send arc ok signal to CNC to start cut.
G. Manual Operation.
Many functions can be manually operated on the operation panel, such as, set Auto/Manual mode of THC, manually control torch Up and Down, IHS test, Arc Start test,.etc.
H. Arc Voltage Divide.
Isolation Voltage Divide, the Voltage Divide ratio is 100:1/50:1. Once Isolation Voltage Divide function damaged, user can also use Non-isolation Voltage Divide on our voltage divider.
1* Arc Voltage Torch Height Controller Unit.
1* Voltage Divider.